How to Replace Inner Tie Rod 2001-2007 Volvo V70

Buy Now!
New Tie Rod from 1AAuto.com https://trq.video/ia-1ASTE00230

This video shows you how to replace the inner tie rods on your 2001-2007 Volvo V70. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.

This repair was done on a 2001 Volvo V70 X/C 2.4L Wagon 4-Door AWD Automatic and the process should be similar on the following vehicles:
2001 Volvo V70
2002 Volvo V70
2003 Volvo V70
2004 Volvo V70
2005 Volvo V70
2006 Volvo V70
2007 Volvo V70

Tools you will need:
• Pry Bar https://trq.video/oGD-1AXAA00020
• 21mm wrench
• 18mm Socket
• 19mm Socket
• 21mm Socket
• Locking Pliers https://trq.video/ohW-1AXAA00139
• Needle nose pliers https://trq.video/owR-1AXAA00051
• Needle nose pliers https://trq.video/owR-1AXAA00052
• 1/2 Inch Impact Gun https://trq.video/om2-1AXAA00252
• 3/8 Inch Impact Gun
• Anti-Seize Grease
• Wire Ties
• Hammer
• Rubber Mallet

Subscribe:    / @trq  

Check out our playlist:
Volvo V70 2001–2007 2nd Generation:    • Volvo V70 2001–2007 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.