My Honda CRV STARTED LEAKING OIL. Let's FIX IT.

In this video, I show how to replace the Harmonic Balancer and Front Crankshaft Seal on my 2010 Honda CRV. This is a relatively simple repair for anyone who is mechanically inclined. It took me about 1-1.5 hours to get this repair completed (I am spoiled with a lift and heated garage haha).

I noticed this oil leak dripping recently after it snowed and there was a fresh oil spot in the snow. After starting the car and watching it run, I also noticed the harmonic balancer was wobbling REALLY BAD so I replace that as well in this video to prevent catastrophic damage. Thanks as always for watching! Please leave a comment with any questions in regard to the repair!

I got the Harmonic Balancer and Front Crank Seal for this repair from RockAuto.com

Crankbolt Torque Spec: 1st Stage: 36 Ft-Lbs 2nd Stage: 90 Degrees
Lug NutTorque Spec: 80 Ft-Lbs

List of Tools I used:
19mm Impact Socket
Impact Gun
Torque Wrench
Mallet
Clip Removal Tool
10mm Socket and Drill or Ratchet
Bungee Cord
Rags, WD40, Brake Cleaner

Seal Puller (Linked Below This)
https://a.co/d/92ZFjr2

19mm Weighted impact socket and Counter Hold Tool. (Linked Below this)
https://www.amazon.com/dp/B083S7M51Y?...

Gearwrench Serpentine Belt Tool. (Linked Below This)
https://www.amazon.com/dp/B0002WSFTO?...

#hondacrankseal #hondacrv #oilleakrepair #crankseal