GHOST FIRMWARE V2: how to update
Автор: Endorphin.es
Загружено: 2022-11-04
Просмотров: 4591
UPDATE is available to download from the following link:
https://endorphines.info/updates/Ghos...
Release notes: V2.0 RC 03.11.2022
bipolar LP/HP filter closes smoothly in silence, both LP/HP & BPF curves spread more equally for all the knob range (thanks Bryan Noll aka @Lightbath and Robert Pabst aka @CinematicLaboratory for the inputs)
comb filter equaled in volume with the other filters
when DELAY knob is fully wet (CW), no dry signal passes anymore
Hall reverb: small shimmer added with REVERB Dry/Wet control for more lush
added extra TONE control for the Reverb similar as in the Delay: via Routing+REVERB Dry/Wet for both Hall and Reverse reverb tanks cutting the boomy low-end or damping the high frequencies (thanks @loopop the input)
external delay clock adjustment: when stopped for more than 2.5 seconds and started again with the same frequency is readjusting without doppler effect artefacts
distortion knob volume compensation adjusted to smoother curve without volume drops (thanks Andrew himself for the input)
parallel processing via global dry/wet: Routing+VOLUME knob sets the mix between the input signal after the IN GAIN (pre-VCA) at full CCW and the final audio chain output before the Volume knob (before post-VCA) at full CW
After the module's reset: Delay's and Reverb's /TONE* controls are in the middle (no tone filtering applied); Reverse reverb pre-delay set to max, Hall reverb pre-delay set to min, MIX control set to FULL WET (100%, CW value).
For more information about @Endorphines and @andrewhuang check out:
Instagram:
/ endorphin.es
/ andrewismusic
Facebook:
/ theendorphines
/ andrewismusic
Twitter:
/ endorphin_es
/ andrewhuang
Youtube:
/ andrewhuang
/ theendorphines
Modulargrid: https://www.modulargrid.net/e/modules...
#endorphines #andrewhuang #ghost
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке: