Hyundai Getz - Rear Wheel Bearing (HD)

The rear bearing did made noise so it had to be replaced. Never did that before and as it went on I thought it will be possible to pull the bearing out on the car directly. Big mistake, you'll see :) ...

TOOLS
jack up
jack stand
21 mm socket for the wheel nuts
14 mm sockets for the bearing itself
small flat screw driver
impact screw driver plus hammer
narrow pliers
10 mm socket and small ratchet for releasing the hand brake cables form inside
13 mm socket for releasing hand brake cables from outside
chisel
table vice
torque wrench
wrench for bleeding the brake
some pump for bleeding the brakes, vacuum or a pressure pump or a helper

MATERIAL
new wheel bearing with ABS sensor, I used this KLT-HY-528, but don't recommend it, OEM is the best or FAG or SKF or OPTIMAL or something but not this, it is loud
threadlocker
grease
brake cleaner
brake fluid
paper towels
gloves

CHAPTERS
00:21 Jacking up and supporting the car
00:41 Why the bearing is being changed
01:00 Dismounting the hand brake cable
01:24 Dismouting the brake drum and cleaning
01:38 Dismounting the wheel bearing
02:01 Making a bearing puller
02:48 Pulling the bearing off on the car (big mistake)
03:03 Spacer plate bended observation
03:24 Separating back plate and spacer from the bearing
04:23 Strengthening the back plate and the spacer plate off the car
06:32 Painting the back plate
07:11 Mounting the wheel bearing back in
09:09 Torque spec for the bearing
09:46 Assembling the drum brake
12:35 Bleeding the brake
13:16 Mounting the hand brake cable back in
13:56 Mounting the wheel and outro

OTHER VIDEOS
HYUNDAI GETZ 1.4i
Preparing for State Vehicle Inspection:    • Hyundai Getz DIY State Vehicle Inspection ...  
Flexipe Exhaust Replacement:    • Flex Exhaust Pipe Replacement (HD)  

MITSUBISHI COLT 1.1i 2005
Fuel Pump Swap:    • Mitsubishi Colt - Fuel Pump Swap and State...  
Negative Fuel Trim Diagnosis:    • Mitsubishi Colt - Negative Fuel Trim Diagn...  
O2 Sensors Replacement    • Slow O2 Sensor Replacement and Engine Trou...  
Sway Bar Bushings Swap:    • Sway Bar Bushings Replacement, not the swa...  
Control Arms Repair:    • Mitsubishi Colt 1.1i - Control Arms Repair...  
Timing Chain Swap:    • Mitsubishi Colt 1.1i - Timing Chain Swap (HD)  
Valve Stem Seals Replacement:    • Mitsubishi Colt 1.1i - Valve Stem Seals Ch...  
Valve Clearance Adjustment:    • Mitsubishi Colt 1.1i - Valve Clearance Adj...  
Clutch Swap:    • Mitsubishi Colt 1.1i - Clutch Swap (HD)  
End Silencer Swap:    • Mitsubishi Colt 1.1i - End Silencer Swap (HD)  
Sway Bar Link Swap:    • Mitsubishi Colt 1.1i - Sway Bar Link Swap ...  
Hand Brake Lever Travel Adjustment:    • Mitsubishi Colt 1.1i - Hand Brake Lever Tr...  
Drum Brake Repair:    • Mitsubishi Colt 1.1i - Rear Drum Brakes Ov...  
Quick Pollen Filter Change:    • Mitsubishi Colt 1.1i - Quick Pollen Filter...  
Oil and Filter Change:    • Mitsubishi Colt 1.1i Engine Oil and Filter...  
Water Pump Replacement:    • Mitsubishi Colt 1.1i Water Pump Swap incl....  
Alternator Replacement:    • Mitsubishi Colt 1.1i - Alternator swap inc...  
Rear Shock Absorbers Change:    • Mitsubishi Colt 1.1i - Rear Shock Absorber...  
Headlight Change:    • Mitsubishi Colt 1.1i Headlight Replacement  
Air Filter Change:    • Mitsubishi Colt 1.1i Air Filter Change  
Spark Plugs Change:    • Mitsubishi Colt 1.1i Spark Plugs Change  
Pollen Filter Change:    • Mitsubishi Colt 1.1i - Pollen Filter Change  

#Hyundai #hyundaigetz #wheelbearing #diy #carmaintenance #howto #automobile #mechanic #carrepair #repair