Betaflight 4.3 Power and Battery Tab | COMPLETE WALKTHROUGH PART 7

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate...

SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/

---

Watch all the videos in this series at:    • Betaflight 4.3 Install, Flash, Setup Tab |...  
-- TABLE OF CONTENTS --

0:00 - Welcome to the Power and Battery Tab
1:17 - How and why Betaflight determines cell count
4:05 - Voltage Meter Source: Internal ADC
4:40 - Voltage Meter Source: ESC Sensor
7:04 - Not all FC sense voltage from their input power wire
8:44 - Min, Max, and Warning Cell Voltage
12:04 - Why current measurement is important (and difficult)
14:43 - Current meter source: Internal ADC
16:42 - Current Scale and Offset
18:25 - Calibration button (calibrating voltage is easy)
19:10 - Calibrating current is harder

   • The safest way to calibrate your Betafligh...   - How to calibrate your current sensor if you don't have manufacturer values

20:10 - Warning: values limited to...
22:35 - Current meter source: ESC Sensor
24:10 - Current meter source: Virtual

How to set up virtual current sensor: https://github.com/betaflight/betafli...

24:56 - Next up! The failsafe tab!