Fitting a Mist Coolant System to my A2-F Milling Machine
Автор: Chris LX200
Загружено: 2025-09-22
Просмотров: 85
I ordered this mist coolant system from Aliexpress for a tenner, 7 days later it was delivered. Advantages over flood coolant is it's more economical on cutting fluid, and in my case in particular doesn't pour coolant all over the floor! The locline tube is a bit short - only 300mm or so - but with good placement it works OK. You can always fit a longer line but the oil feed tube runs inside of it so that would need extending as well. It came with a magnetic base but my mill has no suitable flat surfaces, so I made a bracket instead and screwed it to the back of the mill. I was hoping to have a system that can be switched on/off with one valve but that won't work. Where I have the reservoir now it will siphon the contents onto the mill table even with the air off. I'll have to find an alternate position for it.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
