How to Shim a Krytac

⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪⚪
The whole process is complete now that the shimming is done.
Don't forget if you want to upgrade your gun to take your time and plan ahead (especially the budget, it can get expensive)

Also, make sure that all the 3 gears rotate freely and don't get stuck with each other or with one of the bearings!!!

-Introduction 0:00
-Types of shims 0:18
-Setting the motor height 1:08
-Bevel Gear 1:53
-Spur Gear 2:33
-Sector Gear 3:28
-Checking all the Gears 4:22


The list V3.0 - final (updated 27.07.2020):

-Nozzle: Guarder Bore-Up Air Nozzle 22.40mm
-Inner Barrel: Madbull 6.01 barrel 509 mm
-Hop-up Rubber: Maple leaf 80”
-Cylinder: Guarder Bore-Up
-Cylinder head: Guarder Bore-Up
-Piston: SHS Plastic Piston with Full Metal Teeth
-Piston head: Aluminium Piston Head
-Gears: 16:1 Lonex - !!!the spur gear is too tall but the other 2 gears are fine!!!
-Spring: ASG Ultimate Mil-Spec M135 ( It gives too much power, had to cut 30-40% from the spring to achieve 450fps from 550fps)
-AEG controller: Gate TITAN V2 Advanced Set Airsoft Trigger Mosfet ( because I literally can't find this BTC Spectre Mk II FET for V2 Gearbox with Bluetooth for sale anywhere): If this mosfet is installed, you will block the right side fire selector and the bolt catch release for hop-up. For now, I can't figure out a way around it.
-Motor: ASG Ultimate INFINITY CNC U-18000 High Torque Motor 28 TPA (Long Type)
-Battery: Nuprol 11.1V 30C
'' Investment '': ~£500
.....................................................................................................................................................................
Use the code: TAAS at checkout to get 10% off your purchase at https://www.prae-tac.com
.....................................................................................................................................................................
For any questions, you can ask me in the comments below and in the meantime...
Let's get personal:
  / bratan.airsoft  
  / bratan.airsoft  



Stock footages and audio:
https://freesound.org