I Should Have Seen This Coming...

Support me on Patreon to be entered into giveaways, get BTS with me in the shop, voice reveals, and much more: patreon.com/davidadamsen

Unknown quantities of dirt, rocks, and sand do not make for a great turning experience, and I certainly learned a few things the hard way with this one. In the past, I have had problems with carbide bits loosening, but I had never before had a carbide cutter break. So, my initial assumption was that I had hit a rock or a piece of metal, but nope, it was just super hard epoxy. ‪@EasyWoodTools‬ was great and replaced both the carbide cutter and the screw for free. I eventually resorted to an angle grinder to negotiate the dirt, and I knew there was more dirt and rocks potentially inside the piece. While hollowing the piece, I could tell that a significant portion of the material was dirt/sand/and small rocks, because there were very few clean cuts and lots of vibration. ‪@Lyle‬ , the manufacturer of the hollowing system, had some great advice for me regarding proper hollowing techniques, but we eventually agreed that this material was becoming unworkable and potentially unsafe. However, with the help of Starbond CA glue and TotalBoat epoxy, victory was within reach!

Thanks for watching! I hope you enjoyed this project. Please comment letting me know what you think, and please let me know what you would like me to make next!

Check out TotalBoat products I use:
TotalBoat Thickset Fathom Deep Pour Epoxy: https://www.totalboat.com/collections...
TotalBoat Tabletop Epoxy: https://www.totalboat.com/products/ta...
TotatBoat Clear UV Cure Resin: https://www.totalboat.com/collections...

Check out my website for available items and contact info:
https://www.adamsenwoodcraft.com

All of the music used in this video came from:
https://www.epidemicsound.com/referra...

Follow me on Instagram:
@adamsen_woodcraft

Follow me on Facebook:
  / adamsenwoodcraft  

REFERRAL LINKS TO PRODUCTS I USE:

Glow-in-the-dark Pigments: https://amzn.to/3VKhLo4
(Also) Glow-in-the-dark Pigments: https://amzn.to/3MQxcqX
Kutzall sphere rotary burr: https://amzn.to/3eQdWx6
Vacuum Pump: https://amzn.to/3scCof1
Vacuum Chamber: https://amzn.to/3scaSOP
Minwax wood stabilizer: https://amzn.to/3RICKWu
Starbond Clear Thin CA glue: https://amzn.to/3z0sZdz
Starbond Clear Medium CA glue: https://amzn.to/3Bb6aqr
Starbond Clear Thick CA glue: https://amzn.to/3oqiXxE
Starbond Medium Brown CA glue: https://amzn.to/3PPUIUW
Starbond Medium-Thick Black CA glue: https://amzn.to/3IWDYsY
Starbond Activator: https://amzn.to/3v9r8Ca
TotalBoat Penetrating Epoxy: https://amzn.to/3zr1MSH
TotalBoat Thickset Epoxy: https://amzn.to/3PtTkrw
TotalBoat Tabletop Epoxy: https://amzn.to/3oke5tQ
Mylands cellulose sanding sealer: https://amzn.to/3cd0BgF
Mahoney's Finishes Walnut Wax: https://amzn.to/3IzSBT5
Mahoney's Finishes Walnut Oil: https://amzn.to/3Puc61l
Turntable for glamour shots: https://amzn.to/3yH4AcO
Easy Wood Tools Carbide Cutter: https://amzn.to/3z6E6Db
Easy Wood Tools Carbide Cutter (negative rake): https://amzn.to/3yH6JVN
Beall buffing system: https://amzn.to/2BC90YG
3 inch Sanding Disks: https://amzn.to/2Zc6ccY
Makita right angle drill/sander: https://amzn.to/2A54CkB
My favorite finish (Mahoney's Walnut products): https://amzn.to/31uM88z
Pyrography Pen: https://amzn.to/2G5HJwU
Carter & Son 5/8" Bowl Gouge: https://amzn.to/2G5YV5g
Crown Diamond Parting Tool: https://amzn.to/2NIqsOj
Tormek T-8 Sharpener with Woodturners Accessories: https://amzn.to/30D2iKA
Five minute epoxy: https://amzn.to/2udSavt
My camera: https://amzn.to/34Ef0Mo
My microphone: https://amzn.to/3APkRPM