How to change the brake pads on the rear wheels on VW Passat B6
Автор: AUTO EXPERT
Загружено: 2022-04-25
Просмотров: 246
Hello friends!
In this clip I will change the brake pads on the rear wheels.
1. Secure the car so that it does not move and release the parking brake.
2. Loosen the studs and lift the car on the jack.
3. Remove the studs and the wheel and place the wheel under the car for greater safety.
4. Use the tester to open the calipers pistons.
5. Use keys 15 and 13 to open the caliper.
6.Remove the caliper and brake pads.
7.Clean the caliper bracket. You can use a disc spray.
8.Install the new brake pads.
9.Clean the caliper and use a similar press and press the piston, turning to the right.
10. Assemble the caliper and tighten the two screws.
11.Check the plug and wiring of the electric motor.
12. Assemble the wheel and tighten the studs.
13. Get the car off the jack and check the studs again.
14. Do the same for the other wheel.
15. Use the tester to close the calipers pistons.
16. Check the operation of the parking brake.
Job done! :)
If my video was helpful, please click the LIKE and SUBSCRIBE button!
Thanks!
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
![How to change rear brake pads on VW PASSAT B6 (3C5) [TUTORIAL AUTODOC]](https://ricktube.ru/thumbnail/6NIVQwUb1Sg/mqdefault.jpg)
