Fix Paper Shredder That WONT Turn POWER On (Bonsaii HP Aurora Amazon Basics Fellowes Bonsen Woolsche

Here’s a step-by-step guide for fixing a paper shredder that won’t turn on:
1. Check Power Supply
Ensure it's plugged in: Make sure the shredder is properly connected to a working power outlet.
Try another outlet: Use a different outlet or test another device in the same outlet to rule out power issues.
2. Reset the Shredder
Some shredders have a reset button (usually located at the bottom or back). Press and hold the button for 5-10 seconds to reset it.
3. Inspect Safety Mechanisms
Ensure the shredder head is securely placed on the bin. Many shredders won’t turn on unless the head is properly seated.
Check if the bin is fully inserted or if there is any obstruction preventing it from seating correctly.
4. Clean the Sensors
Shredders often have sensors that can get blocked by dust or paper particles.
Use a soft, lint-free cloth or compressed air to clean the paper slot and the internal sensors.
5. Check for Overheating
Shredders have thermal protection that shuts them down if they overheat.
Allow the shredder to cool for 30 minutes before trying again.
6. Look for Paper Jams
Even small pieces of paper can cause the shredder to stop working.
Use tweezers or the reverse function to remove any stuck paper or debris.
7. Inspect for Mechanical or Electrical Issues
Check for a blown fuse or tripped breaker (some models have internal fuses).
Look for loose or disconnected wires (only if you’re comfortable opening the machine).
8. Professional Repair or Replacement
If none of the above steps work, the motor may have failed. Contact the manufacturer for warranty information or repair services. #papershredder

Disclaimer: As an Amazon Associate I earn from qualified purchases.