රයිස් කුකර් රෙපයාර් 🔥 Rice cooker repair Sinhala

In this video u learn how to change heating element of your rice cooker cooker

Rice cooker heating🔥 element changing video 2025

Changing the heating element of a rice cooker is a delicate task that requires some technical skills. Here’s a step-by-step guide to help you with the process:

Tools and Materials Needed:
Replacement heating element (specific to your rice cooker model)
Screwdriver (usually Phillips or flathead)
Multimeter (optional, for testing)
Electrical tape (if needed)
Soldering iron (if wiring needs to be re-soldered)

Steps to Change the Heating Element:
1. Unplug the Rice Cooker
Safety first! Ensure the rice cooker is completely unplugged from the power outlet before starting the repair.
2. Remove the Outer Housing
Use a screwdriver to remove the screws holding the outer casing of the rice cooker. These screws are usually on the bottom or around the sides.
Gently remove the casing, making sure not to damage any internal parts.
3. Locate the Heating Element
The heating element is usually located at the bottom of the rice cooker. It’s a metal coil or a flat metal plate that provides heat to cook the rice.
Depending on the model, it may be mounted on the bottom or the inner pot.
4. Disconnect the Heating Element
You will see the wires that connect the heating element to the control board. Take note of how the wires are connected (take a picture if necessary) before disconnecting them.
In some cases, you might need to unscrew or unclip the wiring terminals. If the wires are soldered, you may need to use a soldering iron to desolder them.
5. Remove the Old Heating Element
After disconnecting the wires, you should be able to remove the heating element.
If it's secured with screws or brackets, remove those to free the element.
Carefully take out the old element without damaging other components inside.
6. Install the New Heating Element
Place the new heating element in the same position as the old one.
If necessary, screw it into place or secure it using brackets, ensuring it's firmly held in position.
7. Reconnect the Wires
Reconnect the wires to the new heating element, following the same wiring pattern as before.
If you had to disorder the old element, you may need to solder the wires to the new element.
8. Test the Connections
Use a multimeter to check if the connections are properly made and there is no loose contact.
9. Reassemble the Rice Cooker
Once the new element is securely in place, reattach the outer housing of the rice cooker by aligning it and securing it with screws.
Make sure everything is properly closed, with no wires exposed.
10. Test the Rice Cooker
Plug the rice cooker back in and perform a test to check if it is heating up properly.
If it heats as expected, the job is complete.

Important Considerations:
Model-Specific Instructions: Refer to the rice cooker's manual or service guide for any model-specific instructions or warnings.

Safety: If you are unfamiliar with electrical components, consider seeking professional help, as mishandling can cause electrical issues or void warranties.

Replacement Parts: Make sure to purchase a replacement heating element that matches your rice cooker’s make and model.

By following these steps, you should be able to replace the heating element in your rice cooker. If you're unsure about any of the steps or feel uncomfortable with electrical components, it's always a good idea to consult a professional technician.

#ricecooker #ricecooker_repair #ricecookersinhala