Taranis Q X7 OpenTX Tutorial - Timers

Taranis OpenTX - Model Timers
http://rcdiy.ca/taranis-opentx-timers/

RCdiy
http://rcdiy.ca/

OpentTx Lua Scripts Telemetry
Getting started http://rcdiy.ca/telemetry-scripts-get...
Repository https://github.com/RCdiy/OpenTxLua

Help pay the bills :)
  / rcdiy  
http://rcdiy.ca/patronage/

Us my affiliate links (It won't cost you anything.)
Amazon
http://amzn.to/2iDRfgb
Banggood
https://www.banggood.com/Wholesale-To...

----------------------------------------------------------------------------------------------------------

Model Timers

Timers are associated with models. There are up to 3 timers. The first two can display on the main screen, the third is for use with logic switchs and other non display uses.

From the main view

Press MENU

Press PAGE

Timer OFF
Timer is not displayed in the main view and turned off
THs
Timer on when throttle is not all the way down
Video 0:42
Th%
Timer speed proportional the throttle, THR 100% Timer 1 second intervals, THR 50% Timer 2 second intervals
Video 1:43
THt
Timer always on once throttle is not all the way down Video 3:02
Countdown
Setting the timer to a value above 00:00 puts it into count down mode
Video 3:46
Name
Up to 3 characters for the Taranis Q X7
Appears on the main view screens
Video 4:24


Persistant
Timer retains its value when the Tx is powered of and on or the model is changed and returned to
Video 4:48
Persist. Flight
Timer resets when flight is reset from the main view
Video 4:55
Persist. Manual Reset
Timer resets when reset from the main view
Video 5:42
Minute
Required SD card with sound pack installed
At each minute it's value spoken
Video 6:13
Countdown Silent
No sounds associated with the contdown
Countdown Beeps
Beeps at 30,20, 10 to 0 seconds
Video 6:49
Countdown Voice
Speaks at 30,20, 10 to 0 seconds
Video 7:52
Countdown Haptic
Vibrates at 30,20, 10 to 0 seconds
Video none
Timer Auto Reset
If not persistent the timer resets when the Tx is turned off and then on or the model selection changes.
Timer Manual Reset
From the main view long press ENTER
Video 1:04