How to install GY6 CVT & Trans on SSP-G 180cc POWER KIT Part #5

Thank you for watching and supporting my channel feel free to use my referral links. If you need help with any of these products call or text me Mike (209) 355-8088. I usually respond within 24 hrs.

--------------------------DO IT YOURSELF--------------------------
Time Required: 60-120mins.
Skill Level: Advance

Chemical Used:
• CRC Freeze-Off Super Penetrant https://amzn.to/2wn3BSN
• CRC Sta-Lube Anti-Seize Engine Assembly Lube https://amzn.to/2uK30Kp
• CRC Sta-Lube Moly-Graph Grease https://amzn.to/2uJlkTQ
• CRC Throttle Body and Air-Intake Cleaner https://amzn.to/2x5HMrd
• Bel-Ray Oil Exl Mineral 4T 10W-40 https://amzn.to/2TPO6dZ
• Loctite Heavy Duty Threadlocker Blue 242 https://amzn.to/2TqYtF3
• Mobil 1 Synthetic Gear Lube 75W-90 https://amzn.to/38yHtCh
• Mobil 1 Synthetic Grease https://amzn.to/38h6ilO
• Permatex Copper Spray-A-Gasket Hi-Temp Sealant https://amzn.to/2wkt4Mw
• Permatex Dielectric Tune-Up Grease https://amzn.to/39CcA14
• WD-40 Specialist Penetrant Spray (Blu Torch) https://amzn.to/3cotcLn
• Scott Shop Towels https://amzn.to/32Hjwau (optional)

Parts Used:
• NCY Super Transmission Set https://goo.gl/hFUSqB
• Bando 835-20-30 CVT Drive Belt https://goo.gl/dHKAUv
• CVT Cover (longcase) https://amzn.to/2VUkNcP
• Dr. Pulley 18x14 Sliding Weight 12gm Set https://goo.gl/1jY5Vh
• Dowel Pins 8x10mm Set http://bit.ly/39B3oKf
• MotoForce CVT Nut M12x1.25 Serrated http://bit.ly/3cLiC1a
• NCY Gear Set 15*37 https://goo.gl/U4yPyj
• Performance Oil Seal Set http://bit.ly/2VCyxsI
• Taida Rear Drive Bearing https://goo.gl/yf3qxX
• SSP-G 180cc Big Bore Power Kit: http://bit.ly/2v5ZCd1
• Ban Jing High Torque Starter Motor https://goo.gl/wTTSJn
• Ban Jing Starter Clutch Heavy Duty http://bit.ly/3cJUxYz
• Hoca Crankshaft 2.5mm Stroker https://goo.gl/1unUmv
• Koso Super Flow Oil Pump https://goo.gl/GTWZdB

Add-on (optional):
• CVT Cover Anklebiter Ultimate http://bit.ly/3aG1qIQ
• CVT Cover Gasket (longcase) http://bit.ly/2PWLYQH
• NCY Clutch Bell PTFE Coated Racing Star http://bit.ly/39DtCfo
• NCY Clutch Nut 39mm http://bit.ly/38tpwVG
• NCY Clutch Springs 1000 RPM Blue http://bit.ly/3aBUVqn
• NCY Compression Spring 1500 RPM http://bit.ly/2v5Vbil
• NCY Drive Face CNC-Machined Alumin http://bit.ly/2PYoH0q
• Prima Roller Weight Tuning Kit 18x14 http://bit.ly/33522Vy
• Chain Guide (standard) https://amzn.to/2uJDR2i
• Crankcase Bushing 3-Piece Set http://bit.ly/2Qe6rRd
• Dowel Pins 10x14mm Set http://bit.ly/39CKaE5
• Oil Chain 22 Links https://goo.gl/ozLb65
• Starter Clutch Nut http://bit.ly/3cJTlo8
• Woodruff Keys http://bit.ly/39yuaDe

Tools Used:
• 8mm Hex Bit Socket https://amzn.to/39AuO34
• 8mm, 10mm, 12mm Sockets with 4" min-ext Wrench https://amzn.to/2vow36J
• 9mm Wrench and Adj. Wrench https://amzn.to/2vow36J
• Bearing Separator and Gear Puller Set https://goo.gl/Vs6C6Y
• Big Head Phillip Screw Driver https://amzn.to/2vow36J
• Feeler Gauge .004, .005, .006 https://amzn.to/2wjyiIq
• Flat-Head (narrow) https://amzn.to/2vow36J
• Flywheel Puller https://goo.gl/GNToF7
• Hydraulic Compression 12-Ton https://amzn.to/3axX8mT
• Impact Drill https://amzn.to/2wsdfDp
• Impact Socket 17mm https://amzn.to/2uReXOu
• Mallet Hammer https://amzn.to/38gJumk
• Needle-nose Pliers https://amzn.to/2vow36J
• Oil Cannister Pump https://amzn.to/334xxPz
• Oil Drain Pan https://amzn.to/330TEGM
• Oil Funnel https://amzn.to/2vR8D9Z
• Propane Torch https://amzn.to/38g4bPw
• Seal Driver #4, #6, #7 Set Kit https://amzn.to/38gxwJq
• Slide Hammer and Bearing Puller Set https://amzn.to/2x53xHE
• Starter Clutch Nut Socket 3.25” min-ext https://goo.gl/5rMgtS
• Torque Wrench 5-35’ Foot Pounds https://amzn.to/32O0FL8
• Variator Tool http://bit.ly/3cqJHGY

---------------------------
Need more info on GY6 CVT KITS?
Visit our Blog Share: http://ncystore.com/blog