12 Bolt, 33 Spline Truetrac, 3.73 Gear for 1993-1997 or 1998-2002 Camaro - Redbird Speed Options

Link for rear below...

In this video, Redbird Speed takes a look at a 12 Bolt rear end for a 1998-2002 Camaro using stock disc brakes. This same bracket configuration is used for both the 3rd and 4th gen F-Body. This rear end is set up with flush mount style housing ends. We ship the bearings loose because you must drop the caliper bracket first. The axle, caliper bracket, bearing assembly slides in the housing end. The bearing will sit flush and the caliper bracket will retain the axle in the housing end. Need help with ABS? Contact us if you have questions about 3 channel or 4 channel ABS. This rear has a 33 spline set of axles using a Truetrac Eaton Posi. This is a worm gear style unit. We like this unit because there are no springs or clutches to wear out. A 1350 pinion yoke is a must. This yoke is larger and allows options for adapter U joints if needed. There are many ways to customize this rear. This rear can be narrowed, powder coated, setup with Torino housing ends, second bolt pattern, different studs, 4 series carrier, and more. There are options in the 3rd and 4th gen F-Body platform including the Ford 9" and the Dana 60. Making more power and need something stronger? Contact us!

https://www.redbirdspeed.com/product-...

1993-2002 Camaro, Firebird, Trans Am, F-Body

Stock width 65" wheel mounting surface to wheel mounting surface
Narrowed - Same Price
Brackets welded in the stock location
Raw finished housing
Includes torque arm provision
12 Bolt - USA made casting
3" tubes / 1/4" wall - seamless DOM
33 spline Moser bolt-in style axles
33/35/40 spline axles have a 10-year warranty
Truetrac posi - 3 Series
Choice of gear ratio
1350 yoke
Black powder coated cover
Sealed ball bearings - Sent loose
5 x 4 3/4 bolt pattern
Flush mount ends for stock disc brakes
Optional Torino ends for aftermarket disc, 2 1/2" common offset

12 bolt internals are 12 bolt passenger car spec. Axle bearings are common Ford 88128 found at any part store.

We recommend Lucas 80/90 non-synthetic with no additives in Truetrac differentials.

If you would like to narrow this rear, do a different powder coat color, use a different bolt pattern, switch to other disc brakes, add adjustable lower control arm mounts, hold the shipment at your local terminal, we can accommodate your needs. Reach out to us and we will get you a custom quote.

You can expect a 2-3 day build time. Powder coating adds about 1 week to production.

Sales tax only applies to Indiana residents.
Any questions, leave a note or contact us at 260-301-2424.