How To Disconnect Heater Hose On Ford 2.0L

In this video I show how to disconnect and reconnect a Ford heater hose used on 2012-2016 Ford Focus 2.0L and 2013-2016 Ford Escape 2.0L Ecoboost. The process is very simple once you understand how the coupling that connects the heater hose works. First turn the two tangs on the ring, as shown in the video, counter clockwise. This unlocks the coupling. Once the coupling is unlocked you can then disconnect the heater hose. To reconnect, first turn the two tangs on the ring clockwise until the tang with an arrow on it lines up with the symbol on the black plastic portion of the housing as show in the video. Then reconnect the coupling. Be sure the divot on the male end lines up with the symbol on the coupling. Push the hose on until the coupling snaps into place. Give the hose a light tug (don't break anything in the process) to insure it is locked securely.

The special tool used in the video is a Lisle 39200. You can find it by clicking the ling below.:
https://amzn.to/3LZigan

Disclosure: As an Amazon affiliate I earn commission on qualifying sales.

Information for specific years and models that this hose fits on was taken from the back of the package of the Lisle tool

Warning: Whenever servicing the cooling system, disconnecting hoses, the cooling system should be totally cool and depressurized. Injury can occur if care isn't taken. Please refer to your repair manual for information on how to safely cool and depressurize your cooling system.

Warning!! Be sure the cooling system is totally cool and depressurized before disconnecting heater hose. Hot coolant under pressure could spray onto you causing personal injury if you don't. I'd suggest letting the vehicle cool down, with the engine off, for a few hours before opening the cooling system. I'd also suggest carefully opening the radiator cap to relieve any pressure that may be in the system after the engine is cool. (Place a rag over the radiator cap before removing it. Remove it slowly and carefully. Do not allow the cap to blow off and possibly get hot coolant on you.) Once the system is cool and depressurized then you can perform you repair. Use your repair manual for further information on whatever repair you are performing.

For tool reviews and product recommendations by Barbour's Auto Help visit my store front on Amazon by clicking the link: https://www.amazon.com/shop/barboursa...

Discloser: As an Amazon affiliate I make a commission on qualifying sales.

DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses, protective gloves and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbours Auto Help, Barbours Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Barbour'sAutoHelp makes no guarantee that the information provided is totally complete, synchronized and accurate. Verify everything using an appropriate repair manual.