How To Replace Cruise Control Combination Switch 2000-2006 Chevy Tahoe

Buy Now!
New Turn Signal Combination Lever from 1AAuto.com https://trq.video/ic-1AZCC00166

The turn signal stalk contains a number of other switches and buttons for other functions as well. In this vehicle the cruise control is located on the combination switch. If you need to replace the cruise control buttons, you'll have to replace this entire combination switch on your 2000-2006 Chevy Tahoe.

• Check here for more videos on the 2000-06 Chevy Tahoe    • Chevy Tahoe 2000-06 2nd Generation  

This repair was done on a 2005 Chevrolet Tahoe Z71 5.3L Sport Utility 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2000 Chevrolet Tahoe
2001 Chevrolet Tahoe
2002 Chevrolet Tahoe
2003 Chevrolet Tahoe
2004 Chevrolet Tahoe
2005 Chevrolet Tahoe
2006 Chevrolet Tahoe

Tools you will need:
• Flat Blade Screwdriver https://trq.video/oaiT-1AXAA00013
• 10mm Socket https://trq.video/o9f-1AXAA00017
• 7mm Socket https://trq.video/o9f-1AXAA00017
• T25 Torx Socket
• Socket Driver
• Socket Extensions https://trq.video/oah8-1AXAA00015

Subscribe:    / @trq  

Check out our playlist:
Chevy Tahoe 2000-06 2nd Generation:    • Chevy Tahoe 2000-06 2nd Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.