Hornby Ringfield motor upgrade kit fitting tutorial. Part 2 - Wiring for DCC.
Автор: Horns & Whistles Workshop
Загружено: 2021-12-31
Просмотров: 12377
Video tutorial on how to wire up your Ringfield motor upgrade kit for use with DCC.
Part 1, which is the fitting video guide, can be found here... • Видео
The motor kits can be purchased on eBay here... https://www.ebay.co.uk/itm/143867454959
Other parts used in the fitting can be found as follows...
Thin black wire - https://www.ebay.co.uk/itm/143841416225
Black tack - https://www.ebay.co.uk/itm/143867362024
DCC 8 pin socket / PCB - https://www.ebay.co.uk/itm/223670776213
LaisDCC decoder and stay-alive unit - https://www.ebay.co.uk/itm/192671932108
CV settings used for motor control...
CV29 = 2
CV3 = 20 (acceleration rate - increase value to make acceleration slower / smoother)
CV4 = 4 (deceleration rate - increase value to make acceleration slower / smoother, however you have less control of where the model stops)
CV2 = 2 (min speed value)
CV6 = 15 (mid speed value - should be 1/4 - 1/3 of the max speed value)
CV5 = 60 (max speed value - increase value to make top speed higher)
Although these are not numerical order, I suggest making those CV adjustments in the above order.
A CV calculator from Digitrax, which is a very handy tool to save, is below...
https://www.digitrax.com/support/cv/c...
Some useful links that will go into more detail about how DCC works, CV programming and DCC conversion are below...
https://www.brian-lambert.co.uk/index... - Has 2 pages dedicated to DCC and lots of other useful info.
https://dccwiki.com/ - lots of in depth info on all things DCC
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке: