3 EASY Plant Stands YOU Can Build in Less Than 1 Hour // DIY Woodworking

In todays WoodStory we are building Easy Plant Stands, and I am going to show you 3 different methods and 3 different designs using either a table saw, a bandsaw or a CNC so regardless of what tools are in your shop there is going to be a method you can use. And best of all, these can all be made in one hour or less and you even get a chance of using up your scrap wood!

So go grab your tools and let’s start this WoodStory.

👉 GRAB THE PLANS HERE: https://shorturl.at/BnhQq

👉 Buy the finished product here: https://shorturl.at/UBfmA

👉 View how to build the 'Cross Cutting Sled' here:    • YOU Can BUILD This Crosscut Sled || DIY Be...  

📧 Send me a photo of your creation: [email protected]

⌚ TIMESTAMPS
00:00 Intro
00:20 Project #1 - Simple Plant Stand Table Saw Version
01:30 Materials required
02:00 Rabbet Joint making
07:30 Setting the table saw
08:53 Tip for making the stands faster
09:19 Chiseling the grooves
09:45 Project #2 - The Arch Plant Stand Bandsaw version
10:26 Templates
11:24 Band-saw cutting
11:45 What NOT to do
12:20 Tip for making this version faster
13:20 Final touches
15:45 Recap
16:29 Project #3 - The Puzzle Plant Stand CNC version
18:30 Tips for selling
20:00 Carbide Create CNC setup
24:42 Cutting the pieces on the Shapeoko 5 Pro
26:00 Gluing the joints
26:30 Final Sand and Stain
27:10 REVEAL of the 3 Plant Stands

👕 Famous Upside Down Imperial/ Metric Flip Chart T-Shirt: https://standishwoodstory.com/collect...

🏆Support Me Via Patron:   / standishwoodstory  

Affiliate Links:
*Clicking on the following will cost you nothing, but I earn a commission from products sold via the links below:

🪚CNC Used: Shapeoko 5 Pro: https://shop.carbide3d.com/STANDISHWO...

🔽CONNECT WITH ME
🌐 Website: https://standishwoodstory.com/
📸 Instagram (@:standishwoodstory):   / standishwoodstory  

#DIYwoodworking, #woodworkingtips, #woodworkingprojects