The Suicide Squad Harley Quinn Javelin Tutorial 2: Adding Detail

Here's my javelin detail video with all the information about how I added it on top of the base structure!

This tutorial will cover: -

1. Pattern transfer onto foam
2. Cutting the foam detail
3. Gluing the EVA foam detail to EVA foam base
4. Adding texture using a dremel
5. Cleaning the excess glue

If you are using my files you will need to use:-

Transfer Template
Skull Group
Textured Part
Detail Group File 1
Detail Group File 2

Pattern for this tutorial is available at (insert Etsy link). The files that you will receive include the template for transferring, design drawing and all the detail files. I cut these on a Cricut but you can also cut them by hand if you choose to.

Materials used: -

1mm Foam
2mm Foam
Foam Clay
Evo-Stik Contact Cement
A4 paper
Masking Tape

Tools Used: -

Printer
Cricut
Cricut deep-point blade
Cricut Mat
Biro pen
Gold metallic pen
Pointed drill bit
Steel Rule
Soldering iron
Dremel
Heat gun
Rough sandpaper
Fine sandpaper
Sanding Block

Safety Information: -

Please make sure you are safe if carrying out any of the steps in the video. For dremelling there are particles which will fly about so you need to ensure you cover your mouth and nose with a dust mask. Also protect your eyes with safety goggles/glasses as the particles can get in your eye. Additionally, you are using moving tools and need to think of a worst case scenario such as one of the bits comes loose. You should also wear suitable clothing and footwear.

When using glue please read the instructions. You might be using different glue from me hence why I haven't detailed safety instructions. They can vary - some require particular respirators for instance. In almost every instance you should use in a ventilated area and wear gloves if required.

Safety comes first always.

Can't wait to see all your javelins! The patterns for my javelin can be found at https://www.etsy.com/uk/shop/TheCryst...