12 Volt Hyper Tough Tire Pump. Hyper Tough Digital Inflator.

This is a review and demonstration of the Hyper Tough 12 Volt Tire inflator.
This includes how to set the 12 volt Hyper Tough Digital Inflator above 50 PSI.

The first thing to be reviewed is what accessorizes are included with the purchase of the Hyper Tough Digital Inflator. This includes a review of the removable and replaceable battery that comes with the Hyper Tough Digital Inflator. Then a demonstration of how to use the included battery charger with the included battery. Next we show how to install the batter into the Hyper Tough Digital Inflator. We then show the 4 included attachments which includes two nozzle attachments, one ball pin attachment and one schrader valve to presta valve adapter.

I show the two functions of the power button. Push and hold the power button to toggle the unit on and off. A normal push of the power button will toggle the motor on and off.

I show the use of the plus and minus buttons to set the desired tire pressure. I also show that the flashing number is the desired tire pressure and the solid number is the current tire pressure.

I show the two functions of the mode button. To change the units of measurement you need to press and hold the mode button. This will toggle through PSI, BAR and KPA.

Then I show the second function of the mode button to toggle between putting air in a car, a motorcycle, a bicycle or a sports ball. This is accomplished with a quick push of the mode button to toggle between all the above mentioned modes.

I then explain the differences between each mode, including how the default desired pressure and allowable PSI range is changed. This is important because the manual did not explain this very well.

I then show how to use the light and safety strobe features of this tire inflator

We then review a design decision that might cause a person to accidentally drain the battery.

Then a detailed demonstration showing step by step each action a person would take to use the Hyper Tough Digital Inflator. These steps include the following:
1 - Press and Hold the power button to turn on the Hyper Tough Digital Inflator
2 - If needed, press the mode button
3 - Use the plus and minus buttons to choose the desired pressure.
4 - Then hit the power button to toggle the Hyper Tough Digital Inflator motor on
5 - What for the tire to be filled with air from the Hyper Tough Digital Inflator
6 - Show how to remove the tire inflator hose from the tire
7 - Press and hold the power button to turn off the Hyper Tough Digital Inflator.

I then show in real time a car tire being pumped up with the Hyper Tough Digital Inflator. This will allow a person to see the Hyper Tough Digital Inflator running for about 2 minutes. This demonstration will allow the viewer to see the speed of the inflator and how little vibrations are caused by the Hyper Tough Digital Inflator.

I then go over who would benifit from the Hyper Tough Digital Inflator. I also review who would not benefit from the Hyper Tough Digital Inflator. I review use case scenarios where the Hyper Tough Digital Inflator would be useful. I review use case scenarios where the Hyper Tough Digital Inflator would not be ideal. I note the lack of vibration from the Hyper Tough Digital Inflator.


This video is good for all models similar to model 80036 that have plus and minus keys from many brands.

Chapters:
00:00 Intro
00:24 What Comes Inside the box with your new Hyper Tough Digital Inflator.
01:32 Basic Operation of the Hyper Tough Digital Inflator
08:14 Step By Step Demonstration of how to use the Hyper Tough Digital Inflator
10:15 Demonstration with a car tire being inflated with the Hyper Tough Digital Inflator
13:39 Conclusions about the Hyper Tough Digital Inflator.

#hypertough
#walmart
#tireinflator
#tirepump
#bicyclepump
#12volt
#cordless