DIY Sequential LED Turn signals for any vehicle | Episode 98

12V-24V Mini 3 Keys Single Color LED Controller Brightness Dimmer for led 3528 5050 strip light
https://s.click.aliexpress.com/e/_oC0...

gadget wedda tiktok
https://www.tiktok.com/@gadgetwedda?_...

gadaget wedda face book
  / 1bqjlggdrx  

Adding LED lights to the side mirrors enhances visibility, improves safety, and gives the vehicle a stylish look. These lights can function as turn signals, puddle lights, or decorative accents.

2. Components Required
LED Strips or Individual LEDs (preferably waterproof and automotive-grade)
Resistors (as per the LED voltage requirements)
Small Circuit Board (if additional control is needed)
Wires & Connectors
Relay (Optional) (for better power management)
Soldering Kit (for secure connections)
Electrical Tape & Heat Shrink Tubing (for insulation)
3. Installation Steps
Access the Mirror Housing

Remove the mirror glass carefully.
Open the mirror assembly to expose internal wiring.
4 Wire the LEDs to the Circuit

Connect LED positive (+) to the 12V power source (turn signal or door light wire).
Connect LED negative (-) to ground.
If using a relay, connect it to the vehicle’s electrical system accordingly.
5 Safety Tips
Disconnect the vehicle battery before installation.
Double-check polarity before powering the circuit.
Use a fuse to prevent short circuits.
Ensure all wiring is secure and insulated to avoid damage.

thank you