Wooden Monitor Stand with Drawer and USB Charger - DIY
Автор: LCC Workshop
Загружено: 2022-03-25
Просмотров: 11930
I needed a monitor riser, so I made this wooden Monitor Stand.
I made it from spruce.
I decided I will not use any screws, nails, or hardware.
Ordinary drawer slides are too robust, so I used 10x10mm spruce slats.
I cut them to length with my Douzuki handsaw.
The only thing on this monitor stand that is not natural and is imported is a USB charger.
I had to drill a 50mm hole for this charger so I used my CNC. I took advantage and I routed two more slots, one for a pencil and one for a smarphone.
Dimensions of this monitor stand are 500x250x120mm.
Below are the dimensions of profiles and boards I needed:
(all spruce)
Glued board 1000x300 cut to:
500x250mm 1x top board
100x248mm 2x legs
456x47mm 1x front
40x10mm slat for sided of the drawer
229mm 2x
418mm 2x
40x20mm slat for board support at the back
460mm 1x
10x10 mm slat for drawee slides
229 4x
To precisely cut these I used my Douzuki Handsaw
I finished it with Rustins- Danish oil so it fills silky smooth.
Thanks for watching folks and yes, start woodworking :)
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
