How to Replace Front Loaded Knuckles 2012-2017 Toyota Camry

Buy Now!
New Steering Knuckle Assembly from 1AAuto.com https://trq.video/ib-1AAXX00257

This video shows you how to install new front loaded knuckles from TRQ on your 2012-2017 Toyota Camry.

This repair was done on a 2014 Toyota Camry SE 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Toyota Camry
2013 Toyota Camry
2014 Toyota Camry
2015 Toyota Camry
2016 Toyota Camry
2017 Toyota Camry

Tools you will need:
• 17mm Socket https://trq.video/ob3f-1AXAA00015
• 19mm Socket
• 21mm Socket
• 22mm Socket https://trq.video/orJ-1AXAA00266
• 30mm 12-Point Socket https://trq.video/oar-1AAST00002
• 1/2 Inch Impact Gun https://trq.video/oxY-1AXAA00252
• 3/8 Inch Impact Gun
• 1/2 Inch Breaker Bar https://trq.video/orx-1AXAA00078
• Socket Extensions https://trq.video/ob3f-1AXAA00015
• Swivel
• Torque Wrench https://trq.video/oa7T-1AXAA00044
• Anti-Seize Grease
• Gloves https://trq.video/oaWE-1AXSS00048
• Safety Glasses
• Floor Jack https://trq.video/oauv-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oagy-1AXAA00065
• Large Hammer

Subscribe:    / @trq  

Check out our playlist:
Toyota Camry 2012-2017 7th Generation:    • Toyota Camry 2012-2017 7th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.