Tecno Pova Neo Battery Connector Ways Solution | Battery Not Charging Fix | Full Hardware

In this video, you will learn the complete hardware solution for Tecno Pova Neo battery connector ways, battery not charging issues, connector shorting, loose battery terminals, and sub-board line breaks. This repair guide is specially made for mobile technicians who want a clear and simple diagram-based solution. Follow the step-by-step instructions to fix the issue safely. Suitable for beginners and professionals.

✅ 30 Most Searching Titles

Tecno Pova Neo battery connector problem

Tecno Pova Neo battery ways solution

Tecno Pova Neo not turning on fix

Tecno Pova Neo dead solution

Tecno Pova Neo battery connection ways

Tecno Pova Neo charging not working

Tecno Pova Neo battery line ways

Tecno Pova Neo power problem solve

Tecno Pova Neo hardware solution

Tecno Pova Neo jumper solution

Tecno Pova Neo battery point ways

Tecno Pova Neo battery terminal fix

Tecno Pova Neo no charging

Tecno Pova Neo sub board jumper

Tecno Pova Neo battery IC problem

Tecno Pova Neo battery connector replacement

Tecno Pova Neo battery not detected

Tecno Pova Neo charging pin ways

Tecno Pova Neo motherboard ways

Tecno Pova Neo battery point diagram

Tecno Pova Neo no power fix

Tecno Pova Neo repair tutorial

Tecno Pova Neo mobile repairing

Tecno Pova Neo charging board solution

Tecno Pova Neo PMIC battery line

Tecno Pova Neo PCB diagram

Tecno Pova Neo hardware jumper

Tecno Pova Neo switching problem

Tecno Pova Neo battery connector jumper

Tecno Pova Neo not charging hardware

✅ 30 Step-by-Step Repair Steps

Power off the phone completely.

Remove SIM tray and back cover safely.

Open the Tecno Pova Neo by removing all screws.

Disconnect the battery first.

Remove the sub-board plastic cover.

Inspect the battery connector for damage.

Check connector pins alignment.

Clean connector terminals with IPA.

Check battery voltage using a multimeter.

Test continuity on battery + line.

Test continuity on battery – line.

Check for connector loose points.

Apply micro-soldering if pins are broken.

Re-solder the full battery connector if needed.

Check PCB tracks under the connector.

If tracks are broken, apply jumper.

Follow battery + ways to mainboard line.

Follow battery – ways to ground points.

Check for corrosion around connector.

Clean with brush and hot air.

Inspect sub-board connection points.

Check FPC cable between mainboard & sub-board.

Replace FPC if cut or bent.

Reconnect battery and check charging symbol.

If still no power, inspect PMIC battery line.

Repair or jumper missing PMIC line.

Reassemble phone and test again.

Ensure battery locks properly in connector.

Finalize all screws and cover.

Test charging and power-on function.

✅ Hashtags

#TecnoPovaNeo #BatteryConnectorWays #BatteryProblem #ChargingSolution #MobileRepairing #HardwareSolution #PhoneRepairGuide #BatteryLineWays #SubBoardSolution #MobileTechnician