Husqvarna 701 Enduro LR Brake Pedal Height Adjustment

In this video I share how you can adjust the brake pedal height on your Husqvarna 701 enduro or KTM 690 enduro. KTM/Husqvarna share this type of brake pedal set up, so you will need to take a little more time to adjust the brake pedal height on this type of machine than on most KTM/Husky off road bikes. All in all not too tough to accomplish, and certainly worth the time it takes to get things dialed in, especially if you are going to be riding the bike hard. Recently I have spent a bunch more time off road in very technical situations and found this small adjustment has made a noticeable difference in providing better control of the Husky 701 enduro (or KTM 690 enduro).
Stay tuned for the release of my new website in the next few weeks.
Good luck with your bike and thanks for watching!

00:00 Intro
01:00 Tools
01:05 disconnect luggage rack
01:50 set target height
03:35 remove skid plate and foot peg bracket
04:10 adjust brake pin
05:00
06:00 check height and readjust as needed
07:50 tighten and reinstall foot peg
08:20 adjust free play screw
09:19 conclusion

I had a couple inquiries, so here is a link to my Scissor Jack Stand: https://amzn.to/491LShm

I hope this video is helpful, I'm always delighted to get your questions comments and feedback.
Remember you can also find me at https://dualsportgarage.com/
Thanks for watching!

Note: I received no free product and I was not paid to make this video. This channel is subsidized in part by small commissions paid on some, not all, product links. And as an Amazon Associate, I earn from qualifying purchases. So it is helpful and very much appreciated when you use these links to support this channel.