Replacing Tata Indica V2 Xeta AC Blower Resistor Searched and removed with great difficulty. ASMR

Replacing Tata Indica V2 Xeta AC Blower Resistor Searched and removed with great difficulty.
To change the Blower resistor mechanics wanted to remove complete dashboard of my Indica. Also he told me all gas will be leaked and will need to change.
I had read somewhere that the blower resistor is fixed to blower top so that it gets cooled by blower air.
I removed the AC vent cover on left of dashboard.
Searched on top of blower and found the cables leading to blower resistor.
I had bought a new resistor online from BODOMO after checking the part number from TATA Indica.
Once I got to the blower resistor on top of the blower I pulled it out by watchin it through my mobile phone camera.
Blower resistor is visible from left AC vent of car, only you have to remove the vent.
It is dark inside , so you have to put light through the vent. In case while you put light through the vent you find it difficult to see into the vent then you would have to put light from below the dash board from left side onto the top of the blower so that you can see how resistor is fixed and clipped by a plastic stub, the stub needs to be pulled back to pull out the blower resistor,

Then the blower resistor connection wires need to be pulled out.
Everything is to be done by hand taking help of your feel only no vision is possible. also you may need help of some bolts above to wedge the resistor and pull the cable out.
Thanks for watching.