How to Replace Rear Shock Absorbers 06-18 Toyota RAV4

Buy Now!
New Shock Absorber Set from 1AAuto.com https://1aau.to/ia-1ASSP00625

In the video, 1A Auto shows how to remove and replace worn, leaking, weak, clunking, rattling or blown out shock absorbers. The video is applicable to the 06, 07, 08, 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, Toyota Rav4.

This repair was done on a 2010 Toyota Rav4 Base 2.5L and the process should be similar on the following vehicles:
2006 Toyota Rav4
2007 Toyota Rav4
2008 Toyota Rav4
2009 Toyota Rav4
2010 Toyota Rav4
2011 Toyota Rav4
2012 Toyota Rav4

🔧 List of tools used:
• 17mm Wrench
• 17mm Socket
• 21mm Socket
• 1/2 Inch Breaker Bar
• A Piece of Pipe (for leverage)
• Ratchet
• Socket Extensions
• Torque Wrench https://1aau.to/oWG-1AXAA00044
• Rust Penetrant
• Floor Jack
• Jack Stands

Subscribe:    / @1aauto  

Check out our playlist:
Toyota RAV4 2006-2012 3rd Gen:    • Toyota RAV4 2006-2012 3rd Gen  

For More Info visit us at https://1aau.to/h-bTo

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.