3D Printed Scissor Mechanism - Electrical Connections - Part 4

All the electrical connections onto the end stops, prototyping board, PIR, etc.

Below are links for the models for the 3D printed components, as well as, some affiliate links in case you need a place to buy the non-printed parts. I would suggest you try your local hardware store for the screws and nuts first, since you only really need a few of them.

Google Site:
https://sites.google.com/site/ya3dpri...

3D Printed Parts:
https://www.thingiverse.com/thing:348...

Non-Printed Parts PDF:
https://drive.google.com/open?id=1ACr...

Arduino Code:
https://drive.google.com/open?id=1IGV...

Non-Printed Parts Affiliate Links:

#6-32 x 1 in screw - Qty:13 - https://amzn.to/2NSlfm5
#6-32 x 1/2 in screw - Qty:2 - https://amzn.to/2Ttnx0U
M3x0.5 x 12mm screw - Qty:3 - https://amzn.to/2XLNcQW
M3x0.5 x 8mm screw - Qty:7 - https://amzn.to/2SWicu3
#4-40 x 1/4 in screw - Qty:6 - https://amzn.to/2F2JiMo
#6-32 Nylon Pressure Nuts - Qty:15 - https://amzn.to/2F1mHj1
M3 Nuts - Qty:4 - https://amzn.to/2UuXSBt
End Stops with cables - Qty:2 - https://amzn.to/2SZoadm
12V 100RPM Gear Motor - Qty:1 - https://amzn.to/2VO5nDR
Pololu 1083 Hub - Qty:1 - https://amzn.to/2F0uYE7
2 Channel Relay Module Shield - Qty:1 - https://amzn.to/2NTy1R6
Arduino Uno Prototype Shield - Qty:1 - https://amzn.to/2Uu5MLj
Arduino Uno - Qty:1 - https://amzn.to/2tXF5TE
5.5mm DC Male Power Plug - Qty:1 - https://amzn.to/2u1t3sx
Dupont Connectors - Qty:13 - https://amzn.to/2SZoWag
PIR Module - Qty:1 - HC-SR501 - https://amzn.to/2MN52hh
PIR Module - Qty:2 - HC-SR505 - https://amzn.to/2GjZzgX