TJ-Canoe - Part 1/4 | Self-Designed Plywood Canoe (Free Plans)

This video series is about a DIY canoe made from plywood, which I designed and made myself. I decided to make a cheap canoe, which can be built in a rather short time. So this canoe is made of plywood and built with the stich and glue technique. The wood I used, in the end, was pine and it was actually waterproof.
In This first part I show you how I came from the idea to my CAD-model, made the plans and templates and started cutting out all parts of the hull. All plans and templates were made in Lockdown when I had enough time for this.

Requirements:
Min. Time: 70h
Min. Workspace: 6 m * 3 m
Power Tools: Jig Saw, Eccentric Grinder, Circular Saw, Router, Vacuum Cleaner

Bill of Materials:
3 Sheets of Plywood (250 * 120 cm)
Wood for Gunwales, seats
Epoxy 2.5 kg, Cotton powder 1l
Varnish 2.5 kg
2 Sheets of Fiberglas 160 g/² (1.5 * 5m)

Total Dimensions: https://drive.google.com/file/d/18Vvr...
Arrangement on Plywood: https://drive.google.com/file/d/1_hf6...
Plans in DIN A0:
Bottom 1 https://drive.google.com/file/d/1j3Rj...
Bottom 2 https://drive.google.com/file/d/1K3Gj...
Planks 1 https://drive.google.com/file/d/1A8hU...
Planks 2 https://drive.google.com/file/d/1q3E3...

Scarf-Joint-Jig:    • Homemade Jig For Cutting Scarf Joints in P...  

_______________________________

Instagram:   / tinkererjake