How to Replace Front CV Axle Assemblies 2008-2013 Nissan Rogue

Buy Now!
New CV Axle Assembly Set from 1AAuto.com https://trq.video/ia-1AACS00126
New CV Axle Assembly from 1AAuto.com https://trq.video/ib-1AAXS00193
New CV Axle Assembly from 1AAuto.com https://trq.video/id-1AAXS00194

This video shows you how to install new front cv axle assemblies from TRQ on your 2008-2013 Nissan Rogue. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.

Estimated installation time for a professional technician is approximately: 2 hours 48 minutes

This repair was done on a 2013 Nissan Rogue S 2.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Nissan Rogue
2009 Nissan Rogue
2010 Nissan Rogue
2011 Nissan Rogue
2012 Nissan Rogue
2013 Nissan Rogue

Tools you will need:
• Flat Blade Screwdriver https://trq.video/obUq-1AXAA00013
• 21mm wrench
• 13mm Socket https://trq.video/ocvp-1AXAA00015
• 21mm Socket
• 32mm Socket https://trq.video/oeZ-1AAST00003
• Pliers
• Wire Cutters
• Ratchet https://trq.video/ocu6-1AXAA00016
• Socket Extensions https://trq.video/ocvp-1AXAA00015
• Torque Wrench https://trq.video/obwA-1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags https://trq.video/oXD-1AXSS00035
• Copper Anti-Seize
• Gloves https://trq.video/obHD-1AXSS00048
• Safety Glasses
• Sandpaper
• Transmission Fluid
• Drain Pan
• Funnel

Subscribe:    / @trq  

Check out our playlist:
Nissan Rogue 2008-13 1st Generation:    • Nissan Rogue 2008-13 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.