Uflex Steering Tilt Helm Installation
Автор: Uflex USA
Загружено: 2021-11-01
Просмотров: 10883
This video shows how to install a Uflex Hydraulic Steering System. This specific application is for a Tilt Helm on a center console with dual outboards.
For additional information, please reference the Uflex Installation manual. The difficulty level for this installation is moderate and it will take 1-2 hours on average.
Visit our website here: www.uflexusa.com
Contact us by phone at 941- 351-2628 or by email at [email protected]
Tools required:
13mm wrench
11 mm [7/16 in] drill bit
3 in hole saw
6 Nm [52 in lbs]
6 mm Allen wrench
12.7 Nm [112 in lbs]
5 mm Allen wrench
3 mm Allen wrench
Phillips screwdriver
General purpose grease
5 Nm [ 43 in lbs] (5 mm Allen bolts
7 Nm [61 in lbs] (U-joint 5 mm Allen bolt)
2.5 Nm [22 in lbs] (U-joint 3 mm Allen bolt)
19 mm [3/4 in] open end wrench
11/16 in open end wrench
20Nm [15 lb ft] (fittings and locknut)
19mm [3/4 in] socket
33 Nm [25 ft lbs]
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
