How To Replace Sway Bar Bushings 2006-2011 Chevrolet HHR

Buy Now!
New Sway Bar Bushing Set from 1AAuto.com https://trq.video/ia-GMSFK00008

This video shows you how to install sway bar bushings on your 2006-2011 Chevrolet HHR. The sway bars on your vehicle connect the shocks or struts together for additional stability. Since they have to cross the underside of the vehicle, they are attached at several points along the way. The bushings cushion and dampen those attachments to reduce noise and wear. Over time rubber bushings crack and rot, which could lead to clunking or scraping at the sway bar attaching points.

This repair was done on a 2011 Chevrolet HHR LS 2.2L and the process should be similar on the following vehicles:
2006 Chevrolet HHR
2007 Chevrolet HHR
2008 Chevrolet HHR
2009 Chevrolet HHR
2010 Chevrolet HHR
2011 Chevrolet HHR

Tools you will need:
• Pry Bar https://trq.video/oyE-1AXAA00020
• 15mm Wrench https://trq.video/oAQ-1AXAA00010
• 10mm Socket https://trq.video/oaky-1AXAA00017
• 15mm Socket https://trq.video/oawE-1AXAA00015
• 19mm Socket
• Socket Driver
• Socket Extensions https://trq.video/oawE-1AXAA00015
• Torque Wrench https://trq.video/oZB-1AXAA00044
• Silicone Paste

Subscribe:    / @trq  

Check out our playlist:
Chevy HHR 2006-2011 1st Generation:    • Chevy HHR 2006-2011 1st Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.