Your drone racing club NEEDS this FPV lap timer! // NUCLEARHAZARD

Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: https://www.fpvknowitall.com/ultimate...

SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia

THIS IS MY FULL TIME JOB. Here are other ways that you can support me: https://www.fpvknowitall.com/support-me/

---

The entire project is at: https://nuclearquads.github.io/

Buy complete pre-assembled lap timer: https://www.etsy.com/listing/16049794...

Buy the "base" timing kit (mainboard and fan): https://nuclearquads.etsy.com/listing...

Buy the receiver modules (one per channel you want to monitor, up to 8x): https://nuclearquads.etsy.com/listing...

Buy the case (if you don't want to print your own): https://nuclearquads.etsy.com/listing...

---

00:00:00 - The easiest way to build an event-worthy FPV lap timer
00:02:28 - Where to buy this
00:03:49 - Mount the mainbaord in the case
00:05:16 - Insert the RX5808 receiver modules
00:07:11 - The Raspberry Pi
00:09:18 - Install the fan on the lid
00:11:36 - Install the Raspberry Pi OS on the SD card
00:15:10 - Boot up the Raspberry Pi
00:16:13 - Connect to the RotorHazard with SSH

Download PuTTY at: https://putty.org/

00:17:45 - Install the RotorHazard Install Manager

https://github.com/RotorHazard/RH_Ins...

00:20:15 - Install and configure the RotorHazard server
00:23:05 - Configure auto-wifi-hotspot on the server
00:23:58 - Set up port forwarding for easy access

Instructions are at: https://github.com/RotorHazard/RotorH...

00:24:38 - Set up server to auto-run on powerup

Instructions for setup: https://github.com/RotorHazard/RotorH...

00:27:40 - Reboot the server and test it out!
00:28:12 - Rotorhazard deserves a whole video of its own!

FPVSim Timer:    • Видео  

LiveTime walk-through:    • ImmersionRC LapRF Lap Timer and LiveTime W...