How to Replace Front Bumper Upper Mounting Bracket 2012-2018 Nissan Altima

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-59-de

This video shows you how to install a new front bumper upper mounting bracket from TRQ on your 2012-2018 Nissan Altima.

This repair was done on a 2016 Nissan Altima Base 2.5L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2012 Nissan Altima
2013 Nissan Altima
2014 Nissan Altima
2015 Nissan Altima
2016 Nissan Altima
2017 Nissan Altima
2018 Nissan Altima

Tools you will need:
• 10mm Socket https://trq.video/obuP-1AXAA00017
• 12mm Socket https://trq.video/obRq-1AXAA00015
• Trim Tool Set https://trq.video/oaod-1AXXX00006
• Pliers
• Socket Extensions https://trq.video/obRq-1AXAA00015
• Electrical Tape
• Gloves https://trq.video/oaGp-1AXSS00048
• Marker / Writing Utensil
• PAG Oil
• Safety Glasses
• Pick https://trq.video/oWa-1AXAA00037
• Telescoping Hood Prop Rod

Subscribe:    / @trq  

Check out our playlist:
Nissan Altima 5th Generation 2012-2018:    • Nissan Altima 5th Generation 2012-2018  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.