How to Replace Right Side HVAC Blend Door Actuator 2013-2020 Ford Fusion

Buy Now!
New HVAC Blend Door Actuator from 1AAuto.com https://trq.video/ia-1AHCI00061

This video shows you how to install new HVAC blend door actuators from TRQ on your 2013-2020 Ford Fusion. The temperature blend door actuator is the electric motor that is responsible for physically opening and closing the blend doors in your vehicle's HVAC system. If the actuator isn't working, then you won't be able to control the temperature of the air coming out of the vents!

This repair was done on a 2016 Ford Fusion SE 2.0L Sedan 4-Door AWD Automatic and the process should be similar on the following vehicles:
2013 Ford Fusion
2014 Ford Fusion
2015 Ford Fusion
2016 Ford Fusion
2017 Ford Fusion
2018 Ford Fusion
2019 Ford Fusion
2020 Ford Fusion

Tools you will need:
• Phillips Bit in a Ratchet
• 7mm Socket https://trq.video/ob7p-1AXAA00017
• Trim Tool Set https://trq.video/oaNb-1AXXX00006
• Ratchet https://trq.video/ocB7-1AXAA00016
• Socket Extensions https://trq.video/ocB7-1AXAA00015
• Gloves https://trq.video/obS9-1AXSS00048
• Safety Glasses
• Pick https://trq.video/oaeL-1AXAA00037

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.