How to sharping your tools by CartLife honing guide?

CartLife Honing Guide is an inexpensive tool for chisel sharpening and planer blade sharpening used by woodworkers, carpenter, wood carver, metalworker etc.

No mater your are a hobbyists or professionals, honing guide jig is a must tool that make your sharpening more easier and convenient !

CartLife Hoing Jig has 3 sections for clamping your tools that could be adjustable :

1️⃣.The UPPER-JAWS clamp plane irons and adjust from 1-3/8" to 3-1-1/8" in width. ( Refer the instruction of PLANE IRON)
2️⃣.The MIDDLE-JAWS clamp paring and low-angle chisels and adjust from 1/8" to 1-7/8" in width.(Refer the instruction of PARING CHISEL)
3️⃣.The LOWER-JAWS, flat spots clamp mortise and high-angle chisels and adjust up to 1-7/8" in width. ( Refer the instruction of MORTISE CHISEL)

CartLife Honing Guide / Setting The Angle :

Sharpening angles can be accurated to set using CartLife's sharpening jig by adjusting the tool projection. If chisel projection 30mm for 30° and 40mm for 25° angles, planeiron
projection 38mm for 30° and 50mm for 25° angles. More angles, kindly refer the instruction in the package.

Easy to use :

✅.Turn the Screw-cap, clamp your chisel or other knife tools, move up and down to adjust the angle. And also notice the measurement.
✅.Then tighten the screw-cap, blade edge is smoothly fitted to the whetstone or sharpening stones, slide the knife back and forth to bring your tools back to razor sharping.

https://amzn.to/31XxB1Q