How to Replace a Toilet Flapper Valve

If your toilet keeps running or you have to jiggle the handle to get it to stop, chances are good that you need to replace the toilet flapper valve. I'm going to show you how to choose the right toilet flapper valve for your toilet. Then I'll guide you through the installation.

Sure, this is a super easy fix. But there are some nifty tips that'll ensure you do this the right way. Trust me here, you don't want to buy the wrong flapper valve and discover that your toilet runs AGAIN!!!

If you have an older toilet that uses 3.5 gallons per flush you'll need a different kind of flapper valve than a toilet that uses 1.6 or 1.28 gallons per flush. Usually the gallons per flush is stamped on the top of the toilet bowl.

Use this information to buy the right flapper and choose one that has Microban in it. Microban will stop your flapper from being degraded by bacteria. Pretty cool stuff.

For more tips on this project visit: http://www.homerepairtutor.com/toilet...

#toilettrouble #toiletflapper #toiletrunning

0:01 Choosing the right new flapper
1:15 Empty the toilet tank
1:44 Remove the old flapper
2:13 Clean the seat for a good seal
2:30 Adjust the flapper and install into the tank
3:07 Refill the toilet tank and test the flapper

Disclaimer:
Videos produced by Home Repair Tutor are provided for informational, educational, & entertainment purposes only. Some of these projects, materials, and techniques may not be appropriate for all ages or skill levels. Home Repair Tutor does not make any claims of the safety of the projects, techniques, or resources listed on this site and will not take responsibility of what you do with the information provided by this site. Viewers must be aware by doing DIY projects on their homes they are doing it at their own risk and Home Repair Tutor cannot be held liable if they cause any damage to their homes. Home Repair Tutor cannot claim liability with all applicable laws, rules, codes and regulations for a project.