Range Rover Velar L560 - How to remove or replace rear brake light/ Tailgate closure

This video is to show you how Land Rover Range Rover Velar rear break light assembly to remove and to fit... Hope this helps you if you are one of those who owned one and having difficulty how to fix it....

The tools we will be using are: Trim panel Remover, flat screw, optional to use drill, and most important is the socket 8mm and 10mm. Using 10mm socket to remove the locking nuts inside the door panel each side consisted of two screw nuts, and 8mm socket for the outside. It is not necessarily to remove all those 4 screws outside, once two of them where it is connected to the tailgate, and all the 10mm nuts are out from inside the door and connections are all disconnected, what is left, the fixing clips that retains the rear break light attached to the door/ closure door. Gently apply some pressure and give a little bit shake once all the locking screws and nuts are off.

At the end of this video, we included the result when we forgot to remove those two 8mm screw - covered by those two small black plastic cover.

Please comment below what you think we should do next or want to know more about parts removals and installation for Land Rover Range Rover Velar, Evoque L538-L551, Discovery Sport, Discovery V, Range Rover and Range Rover Sport... Parts of the doors we breaking are also available for replacement (www.abhn.uk)

You can also get the right replacement available at limited stock @ www.abhn.uk or https://www.ebay.co.uk/itm/2244695425...