How to Replace Fuel Pump 2008-2010 Ford F-250 (5.4L)

Buy Now!
New Fuel Pump Module Assembly from 1AAuto.com https://trq.video/ia-1AFPU01454

This video shows you how to install a new fuel pump from TRQ on your 2008-2010 Ford F-250 (5.4L).

Estimated installation time for a professional technician is approximately: 2 hours 42 minutes

This repair was done on a 2008 Ford F-250 Super Duty XL 5.4L Extended Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2008 Ford F-250 Super Duty
2009 Ford F-250 Super Duty
2010 Ford F-250 Super Duty

Tools you will need:
• Pry Bar https://trq.video/oakh-1AXAA00020
• 10mm Socket https://trq.video/ob6S-1AXAA00017
• 13mm Socket https://trq.video/ocBF-1AXAA00015
• 8mm Socket https://trq.video/ob6S-1AXAA00017
• Pliers
• 3/8 Inch Impact Gun
• Ratchet https://trq.video/ocBG-1AXAA00016
• Socket Extensions https://trq.video/ocBF-1AXAA00015
• Gloves https://trq.video/obSv-1AXSS00048
• Rust Penetrant
• Safety Glasses
• Brass Punch
• Floor Jack https://trq.video/oaVo-1AXAA00068
• Hammer
• Jack Stands https://trq.video/oaGZ-1AXAA00065
• Wheel Chocks

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.