How to Replace Exhaust Manifold Catalytic Converter Assembly 2006-2011 Honda Civic

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-93-aK

This video shows you how to install a new exhaust manifold catalytic converter assembly from TRQ on your 2006-2011 Honda Civic. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.

This repair was done on a 2009 Honda Civic LX 1.8L Sedan 4-Door FWD Manual and the process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic

Tools you will need:
• Pry Bar https://trq.video/oTk-1AXAA00020
• 10mm Socket https://trq.video/oa9W-1AXAA00017
• 12mm Socket https://trq.video/obtM-1AXAA00015
• 14mm Socket https://trq.video/obtM-1AXAA00015
• O2 Sensor Socket
• Torque Wrench https://trq.video/oaD4-1AXAA00044
• Copper Anti-Seize
• Gloves https://trq.video/o5v-1AXSS00048
• Rust Penetrant
• Safety Glasses
• Sandpaper
• Sanding Block

Subscribe:    / @trq  

Check out our playlist:
Honda Civic 2006-2011 8th Generation:    • Honda Civic 2006-2011 8th Generation  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.