Ford Mustang 5.0L [#63-2605] Air Intake Installation

Learn how to install K&N performance air intake system #63-2605 on your Ford Mustang with 5.0L engine

Learn more about the features of this intake system:
https://www.knfilters.com/cold-air-in...

See the complete written instructions for this intake system:
https://www.knfilters.com/instruction...

See a complete list of up-to-date applications for this intake system:
https://www.knfilters.com/search/appl...

View dyno testing results for this intake system:
https://www.knfilters.com/dynocharts/...

TRANSCRIPT:

0:14
1. Turn off the ignition and disconnect the negative
battery cable

0:19
2. Remove the four nuts that secure the strut tower brace
and then remove the strut tower brace from the vehicle

1:25
3. Remove the fastener covers on the engine cover, remove
the two nuts that secure the cover

1:53
and then remove the cover from the engine

2:03
4. Disconnect the mass air sensor electrical connection

2:09
5. Disconnect the EVAP vent line, cut the clamp for the sound
tube at the sound drum and disconnect the hose from the drum

2:29
Loosen the hose clamps that secure the intake tube to
the throttle body and air filter housing

2:42
then remove the intake tube from the vehicle

2:48
6. Release the clips that secure the upper air filter housing
and then remove the upper air filter housing from the vehicle

2:53
7. Remove the bolt that secures the air filter housing to
the inner fender

3:03
and then remove the lower air filter housing from the vehicle

3:08
8. Install the provided edge trim onto the K&N® air filter
housing

4:25
Install the K&N® air filter housing into the vehicle and
secure with the provided hardware

4:49
9. Install the provided fittings into the K&N® intake tube as
shown

5:31
10. Install the provided gasket onto the K&N® mass air
sensor adapter

5:40
11. Remove the mass air sensor from the factory air filter
housing and install it into the K&N® adapter

6:33
12. Install the mass air sensor assembly into the K&N® intake
tube as shown and secure with the provided hardware

6:59
13. Install the provided coupling hose (08699) onto the
throttle body and secure with the provided hose clamp

7:23
14. Install the filter adapter into the K&N® air filter
housing and then install the tube gasket onto the adapter

7:32
15. Install the intake tube into the coupler at the throttle
body and onto the filter adapter

7:45
secure the tube to the filter adapter with the provided
hardware

8:32
and to the coupling hose with the provided hose clamp

8:41
16. Connect the EVAP and crank case vent lines to the
fittings installed into the K&N® intake tube

8:56
17. Install the provided cap onto the sound drum as
shown

9:02
18. Install the K&N® air filter onto the filter adapter and
secure with the provided hose clamp

9:16
19. Unhook the mass air sensor wiring harness from the
inner fender and then route to the mass air sensor and reconnect

9:28
20. Reinstall the engine cover and secure with the factory
hardware

10:18
reinstall the nut covers

10:24
Reinstall the strut tower brace and secure with the factory
nuts

11:45
Double check to make sure everything is tight and
properly positioned before starting the vehicle

"K&N® is the world's leading manufacturer of washable performance air filters and cold air intake systems.

The world-famous High-Flow Air Filter™ was pioneered by K&N in 1969, and features an innovate design of layered, oiled cotton media to effectively capture dust, dirt, and contaminants—offering top-quality filtration.

Since that time, K&N has grown into a world-class automotive technology company, selling air filters, cabin air filters, oil filters, and air intakes in over ninety countries—with nearly 10,000 unique products for cars, trucks, motorcycles, outdoor equipment, and industrial applications.

With a strong Consumer Protection Pledge and industry leading warranties, K&N commits to quality, reliability, and customer satisfaction.

Whether you’re looking for an air filter upgrade for your Ford Mustang, a new air intake system for your Chevy Silverado, or an Electronic Carburetor Injection system for your classic Pontiac GTO, you’re sure to find high-quality parts from K&N to propel your vehicle’s performance to the next level. Check out www.knfilters.com to find all of the parts available for your unique application!"