DIY Your own Pool-Noodle RC 3D Trainer airplane!
Автор: RC DemonDriver
Загружено: 2014-07-11
Просмотров: 486641
#diy #rcairplane #rcdemondriver
DIY Your own Pool-Noodle RC 3D Trainer airplane!
This is what you can build from an ordinary foam pool noodle! I call this the "Demon-Claw" 3D plane! My own original design. ... it's so easy to make you don't even need plans just watch my build video coming up in a day or two that will also have the maiden flight !
My Demon-Claw is so easy to build ANYONE can build it!
Here are the parts for this Pool Noodle plane:
2-30 to 40 inch carbon fiber Rods
1 Pool Noodle
1 large sheet of Depron or equvelant foam
1 30-40AMP ESC speed controller
1 750KV or up to a 2000KV brushless outrunner motor use a motor around 1 inch in diameter . . .if it too large it will make your plane too heavy!
4 11-20 gram mini servos
1 6, 8 or 10 inch prop
2 1 or 2 inch diameter foam wheels
Plastic hinges and speed connectors
I use a Futaba 7CAP 2.4Mhz Radio and FASST RX for this plane.
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
