Triple arch power balancing

In this video I demonstrate how I power balanced triple arches made from pixel strips. The triple arches draw quite a bit of power and as you go along the strips the lights get dimmer impacting the color, which is especially noticeable when they are white. In order to fix this issue I connected the power to all three arches directly to the controller. This allowed one side of each of the strips to receive power from the controller, ~ 12 volts. This power balancing effect fixes the color washing impact from excessive voltage drop. The materials I used for power balancing is 2 tees (3x3x3) and one short female to female cable that I made. These parts are listed below along with links to vendors that carry them.

3x3x3 tees from Your Pixel Store:
https://yourpixelstore.com/product/mi...

3x3x3 tees from Wallys Lights. https://wallyslights.com/collections/...

Female Pigtails from Your Pixel store: https://yourpixelstore.com/product/xc...

Female Pigtails from Wallys Lights:
https://wallyslights.com/collections/...

Above are the products I used in the video but you could also order the power injection H’s from Your Pixel Store and you will not need to do any soldering or need them.

Power Injection H from Your pixel Store: https://yourpixelstore.com/product/po...

If you go this way I would order the 6 inch long ones.