How to Build the VENOM-S | 3D-Printed RC Sport Jet Build Guide

Complete step-by-step build guide for the VENOM-S 3D-printed RC sport jet!
━━━━━━━━━━━━━━━━━━━━━━━

📂 Build manual and STL files:
👉 https://cults3d.com/en/3d-model/game/...
✈️Flight Video:
👉   • VENOM-S | 3D Printed Sport Jet with 64mm E...  
⬇️Free Model Stand:
👉https://cults3d.com/en/3d-model/game/...

✈️ Don’t forget to subscribe for more 3D-printed RC jet designs, flight tests, and build tutorials!

━━━━━━━━━━━━━━━━━━━━━━━
🔧 VENOM-S – Components I used
━━━━━━━━━━━━━━━━━━━━━━━

• 64mm EDF (3300KV): https://s.click.aliexpress.com/e/_c4l... or similar
• 60/80A ESC
• 3.5mm connectors (you might need them depending on your ESC): https://s.click.aliexpress.com/e/_c2J...
• 4S 2200mAh LiPo Battery: https://s.click.aliexpress.com/e/_c4W... or similar
• Velcro straps: https://s.click.aliexpress.com/e/_c4E...
• Receiver: 4–6 channels
• Servos [9–12g, metal gears]: https://s.click.aliexpress.com/e/_c3h... or similar
• Carbon tube [1× 500mm × 6mm]: https://s.click.aliexpress.com/e/_c3j...
• 2mm Carbon rods: https://s.click.aliexpress.com/e/_c3k...
• Linkages [1.5mm steel rods]: https://s.click.aliexpress.com/e/_c3C...
• Linkage stoppers [2.1mm diameter]: https://s.click.aliexpress.com/e/_c3z...
• Round magnets 12× (6 × 3mm): https://s.click.aliexpress.com/e/_c4r...
• Servo extensions [15cm & 20cm + Y cables]: https://s.click.aliexpress.com/e/_c4X...
• Servo reverser (only needed with 4-ch receivers): https://s.click.aliexpress.com/e/_c3g...

━━━━━━━━━━━━━━━━━━━━━━━
🌐 Community & Social
━━━━━━━━━━━━━━━━━━━━━━━

🔹 LSPlanes Official Facebook Group
  / 1242674790164757  

🔹 My personal Facebook profile
  / lorenzo.sardo.16  

━━━━━━━━━━━━━━━━━━━━━━━
ℹ️ Affiliate Disclosure
━━━━━━━━━━━━━━━━━━━━━━━

Some of the links above are affiliate links.
If you purchase through these links, I may earn a small commission at no extra cost to you.
This helps support the channel and future projects — thank you! 🙏

━━━━━━━━━━━━━━━━━━━━━━━
⏱️ Chapters
━━━━━━━━━━━━━━━━━━━━━━━
00:00 Introduction
01:38 Fuselage assembly
03:54 Elevator servos installation
05:57 Stabs assembly
07:12 Rudder servo installation
08:53 Wings
13:37 Elevators and rudder
15:39 EDF and ESC installation
17:41 Wings installation
18:15 Final part