Using the Continuum Weight Distribution Hitch | B&W Trailer Hitches

With easy, precise, control and the ability to make adjustments on-the-fly, it's never been easier to achieve proper weight distribution across your towing setup every time you tow.

Level your tow vehicle and trailer in just 10 minutes (or less) with the Continuum Weight Distribution Hitch. Simply take a couple of measurements, pump it up, and hit the road.

--------------------------
This video shows an initial setup method for the Continuum Weight Distribution Hitch.

Before trying the method outlined our video, consult your vehicle's owner's manual for instructions on properly installing and adjusting a weight distribution hitch. If your vehicle manufacturer does not make specific recommendations, refer to the setup steps outlined in your Continuum Weight Distribution Hitch Installation manual along with this video.

Continuum Installation manual: https://bwtrailerhitches.com/sites/de...

B&W suggests a Front Axle Load Restoration (FALR) of 50% to 100%.

Please note that each towing configuration will necessitate a different amount of pressure. Repeat any initial setup procedures and record the new load pressure on the gauge if your trailer load, tow vehicle, or trailer change to help ensure proper weight distribution every time you tow.

Otherwise, once the proper load restoration has been achieved, simply note the pressure reading on the Continuum's pump assembly for future trips with that tow vehicle, trailer, and trailer load combination.

The amount of pressure used is typically 1.2x the trailer's tongue weight, with a FALR ranging from 60% to 90%.

---------------------------
00:00 Intro
00:22 Before You Begin (tools, terms, and prepping for setup)
01:02 Height of Wheel Well, Uncoupled | Measurement A
01:45 Hitch Trailer and Tow Vehicle
02:17 Height of Wheel Well, Coupled | Measurement B
03:20 Using Hydraulic Pump to Reach Target Measurement
03:57 Adjusting Pressure On-The-Fly
04:17 Calculating FALR For Your Vehicle
04:35 Conclusion
-----------------------------

The Continuum Weight Distribution Hitch from B&W Trailer Hitches is designed to transfer part of a coupled trailer's weight from the tow vehicle's rear tires to its front tires. Using a hydraulic pump and cylinder, the amount of weight that is transferred to the front tires is easily adjustable. By making proper weight distribution and sway prevention quick and easy for a safer and more enjoyable overall towing experience.

For more information visit: https://bwtrailerhitches.com/product/...

#bwtrailerhitches #towingadventure