Window drip cap roll forming machine PO-1. Window trim production process
Автор: Evolutioner EU
Загружено: 2021-10-21
Просмотров: 1867
Window drip cap roll forming machine PO-1 allows to produce “window trim” profile by rolling the sheet metal through forming rolls. A window trim is an element that is widely used in construction while windows installation
This machine rolls the window trim profile on both sides simultaneously in a single operation. The rolling speed is 10 m/min. The machine is equipped with 7 pairs of forming rolls. The minimum width of window trim is 120 mm when rolling on both sides at the same time and the maximum width is 610 mm.
To change the width of the window trim, simply use the adjusting handle, which makes it very easy to adjust the machine to go from one trim width to the next. Thus, the adjustment process is not time-consuming.
It’s also possible to roll the window drip cap on the machine in two steps.
This may be necessary if all elements are of different width, so in order not to waste time on readjustment, it will be faster to roll each side separately step by step.
Our website: www.evolutioner.eu
Доступные форматы для скачивания:
Скачать видео mp4
-
Информация по загрузке:
