How to Fit a Sliding Door Window to a Camper Van

In this video we will be fitting a tinted side window to our Renault Master camper van conversion.
It's a pretty straight forward job to do. You wont need any expensive tools for this job, just a method to cut the van panels (I used an angle grinder) a sealant gun and a bit of patience.

The window we fitted: https://ebay.us/deAyFj
Adhesive used: https://amzn.to/3XaGvZz

MY FAVOURITE TOOLS & GEAR

Bargain Compressor - https://ebay.us/L34GFD
Cheap but actually surprising good Spray Gun (and kit) - https://ebay.us/XesLoJ
Track saw https://amzn.to/44094K2
Tracks https://amzn.to/44kqCRv
Angle Grinder: https://amzn.to/3OV9e0O
'Dust Free' Sand Paper Discs: https://amzn.to/44xTqWh
Dust Collection System:
Cyclone 🌀 https://amzn.to/46k11cN
Bucket 🪣 https://amzn.to/3phip1b
Shop Vac: https://amzn.to/3Xu71eT

For the best and cheapest licensed music check out https://app.soundstripe.com/referrals...


⌚️Timestamps:
00:00 Introduction
00:26 Drilling the corners out
01:35 Joining the holes to make a template line
02:09 Cutting the body of the van
02:41 Removing the sharp edges and priming the bare metal
02:52 Fitting the window trim seals
03:22 Cleaning and degreasing the window glass and van
04:09 Priming the door and window
05:39 Applying the window glass adhesive
06:42 Adding tape to the van to stop the window slipping down
07:35 Lifting the window into place and bonding it to the van
08:27 The finished window glass fitted to the van
08:51 Outro


Some of the links in this description are affiliate links that may earn me affiliate payments. Any support for the channel is massively appreciated and allows me to keep making videos.