#Shorts

📌16-Key Capacitive Touch Sensing Shield BMK52T016

📋More Information: https://www.bestmodulescorp.com/bmk52...

✒Description
When a finger touches the copper trace area on the PCB representing the switch area, the capacitance of this area will change. The product determines the output status of the INT pin by detecting this change.

The BMK52T016 includes 16 touch keys. Development boards read the keys’ statuses via I2C interface and lights up the corresponding LED. Touch keys’ sensitivity can be adjusted individually according to your application. For example, when you place an acrylic panel on the product, the capacitance of the copper foil area affected decreases. Therefore, the keys require higher sensitivity.

✒Features
◆Operating voltage: 2.5V to 5.5V
◆Operating current: 4mA @5V
◆Standby current: Bigger than30μA @5V
◆Excellent stability and anti-interference ability
◆It enters standby mode if does not sense a touch for 8 seconds.
◆Integrated 16 touch keys, the corresponding LED lights up once touch has been detected
◆Touch key sensitivity: 55 levels, can be adjusted individually
◆Communication interface: I2C (address: 0x70)

✒PIN Description
You can insert the product into an Arduino UNO or the BMduino-UNO, BM53A367A, which is designed by Best Modules.
You don't need an external cable, just connect the shield to Arduino UNO or the BM53A367A.

You can use the BMCOM interface on the BMK52T016 to connect to the BM53A367A as well.


🏢 Best modules corp.
🔗NO. 3, Creation Rd. II, Science Park, Hsinchu 30077, Taiwan
🤝[email protected]
🔍https://www.bestmodulescorp.com/


#16-KeyCapacitiveTouchSensor #BMS00090 #TouchSensor #Touchpanel #Touchbutton #Touchkey #TouchSensorKey