Momo Mod 07 Steering Wheel Install | Lancer Evo X | How Hard Could It Be?

It's my first time installing a new wheel, so I faced some difficulties.
Mainly from bad hub adapters though.

First, I got a cheap small adapter but my clockspring did not fit, so I removed it, opening it in the process, then I had to fix that.
Second, I bought the NRG Short Hub adapter which worked with the clockspring but the wheel was sitting sideways and the wheel itself was too far away from me.
The wheel on the side could have been fixed with a wheel alignment though.

Finally, I got the WorksBell adapter from Japan and this one fits just right.
Works Bell Steering Wheel Hub Adapter for Evo X (818), 820 is for evo 7,8,9


Overall, I spent way too much for a steering wheel, but it is that it is.
The wheel feels great and that's important (And the saved weight ofcourse).

2x 1.8 Ohm resistors to fix the SRS lights

Timecodes:
0:00 - Intro
1:25 - Unbox
2:42 - Installation (Remove Evo X Steering Wheel)
4:14 - Fix the SRS lights coming from the steering wheel
6:37 - Continue Installation
7:41 - How Lighter is an Aftermarket Wheel
7:52 - Installation Attempt 1 - Fail
10:25 - First drive with bad hub adapter
11:21 - Fixing the clockspring that I just broke
16:23 - NRG Short Hub Adapter - Not good enough
20:27 - Works Bell Hub Adapter - Finally working
22:07 - Installing Momo Horn
23:03 - The Perfect Lancer Evo X Interior
24:58 - Seating position
25:46 - Outro