HOW TO MAKE A CLOSED SEAMLESS TAPE- IN HAIR WEFT EXTENSION By Hairweftingtape.com

We will show you how to close the top of your weft and how to make a multi-colored weft and so much more. This is great so water can not penetrate into your weft and keeps it intact.
We are now offering our safest hair-extension wefting kit that's made with skin-safe acrylic adhesive. It dries clear, is non-toxic, non-latex based - and another big plus: it's non-flammable. Easy to breathe!

Please do not add Beta Bond Plus to your own hair as an install method
due to it being very hard to remove, Liquid gold bond is used by many for that method, still very hard to remove.

When using Beta Bond Plus and Super Solv remover along with our own medical-grade Seamless Pro Extreme Hold hair wefting tape, rest assured all three of these new products are the safest hair extension products on the market. We are the exclusive worldwide source for these kits!

Our products are always tested by us first, and we know our customers will be very happy using our medical-grade tape and Beta Bond Plus adhesive.

A blow-drier is a must when using this adhesive to make your own tape-in seamless hair weft extensions. IMPORTANT in winter months it takes twice as long to dry due to the cold making it a longer drying time. This type of glue must be clear not white and tacky then it will dry once closed.

Please follow our free tutorial on how to make your own tape-in hair extensions using our newest products!

Quick tips:

Directions using Beta Bond Plus glue for making hair extensions

Add Beta Bond Plus glue to your tape. A small line across usually works quite well. Spread it evenly across the width of the tape.
Set your blow dryer to slow low heat for about 30 to 50 seconds

IMPORTANT in winter months it takes twice as long to dry due to the cold making it a longer drying time. This type of glue must be clear not white and tacky then it will dry once nicely but air is key for this type of adhesive to fully cure.

When it starts looking clear, that's when you want to start adding the hair or machine weft hair to your tape.
Add a bit more adhesive before adding your top tape just before closing to complete your hair weft.

Note: Wash your fingers after with warm water and a bit of soap - it should clean up nicely.

Differences between Liquid Gold glue and Beta Bond Plus adhesives

Beta Bond Plus is thinner, and white in color until it dries then it turns clear. It also does not have an intense smell like Liquid Gold Bond A Weave, however, it does have an odor more like Elmer's glue – that, we CAN DEAL WITH while doing our hair!

Beta Bond Plus can be used for all your hair extension needs.

Perfect for making a seamless hair weft extension that is super-strong.
Great to add to the tape when making a weft using machine-wefted hair or hand-tied hair extensions.
HAIR EXTENSION TIPS AND TRICKS FOR A LONGER STRONGER HOLD TIME

If you like, you can heat up your sandwiched taped-in hair extensions. WHY? Heating up your tape a little, will help the tape expand and then shrink onto the hair. By doing this it will give you a super strong holding bond.
When you are done doing an install, do not wash your hair for at least 2 full days, and do not use conditioners on your wefts immediately after.
It's best to not use any conditioners that are oil-based or keratin-based conditioners that can loosen up your tap directly on your new wefts.
Important: when using any product we offer for sale, we ask you to always do a skin test prior to installation.

FREE HOW TO MAKE HAIR EXTENSIONS https://hairweftingtape.com/pages/how...

If you have any questions please feel free to email or call anytime as we are always happy to help!